10 Dp gear
    case
18-diametral pitch
20-degree pressure
20-diametral pitch
    stub

ABA
ABA-PGT
Activate
   Fillet Radius, Fillet Radius Coefficient
   Topping Adjustment
   True Involute Form Diameter
   Working Pressure Angle
    Fillet Radius dialog box
    Major Diameter dialog box
    Minor Diameter dialog box
    Pressure Angle dialog box
Active Part option
Add
   Adding a mounting style to the Gear or Pulley
   Between Pins Example
   Inserting a Spline Tooth Profile
   To modify an existing part:
    centerline
    circle
    coincident relationship between
    dimension
    midpoint relationship between
    mounting style
    new features
    point
    tooth profile
Add-In
Addendum
   DIN-867 Standard
   JIS B 1701-1973 Standard
   Select Company Standards for Addendum, Clearance and Fillet Radius Coefficients
    Select Company Standards
Addendum dialog box
Addendum mod dialog box
   Approach Length
   Contact Ratio
   Recess Length
    Open
       Approach Length
       Contact Ratio
       Recess Length
Addendum Modification
   Addendum Modification
   Bevel Gear Options
   Spur Gear Options
Addendum modification coefficient
    specify
Addendum Modification Coefficients
Addendum Modification option
Addendum modification text box
Affect
    major diameter
AGMA Backlash Range
    Selecting
AGMA range
    falls outside
AGMA Recommended backlash range
    bevel gears
Annotation
    insert
Annotations dialog box
ANSI/AGMA Tooth Proportions
Apply Tab
   Belt Pulley Options
   Bevel Gear Options
   Gear Belt Options
   GearTrax Options
   General Options
   Helical Gear Options
   NetHASP Check
   Spline Options
   Sprocket Options
   Spur Gear Options
   Worm Gear Options
Approach Length
Arcs option
   Bevel Gear Options
   Spur Gear Options
   Worm Gear Options
    select
       Bevel Gear Options
       Spur Gear Options
       Worm Gear Options
ATN
Auxiliary Sketches
Avoid Undercut

Back cone surface
    constructed tangent
Background color
    backlash
Backlash
   Backlash
   Creating Non-Standard Pitch Spur Gears
   Selecting an AGMA Backlash Range for Spur Gears
    0.0100
    background color
    change
    Enter
Backlash dialog box
    Open
Backlash range
    select
Backlash specified
Backlash text box
    upper right hand corner
Backlash tolerances
Balanced strength
Base circle
   Creating Non-Standard Pitch Spur Gears
   Selecting a Manufacturing Method for Spur/Helical Gears
    Involute profile extends
Base diameter
   Auxiliary Sketches
   Creating Non-Standard Pitch Spur Gears
Base feature
   Creating a Bevel Gear
   Introduction: GearTrax/SolidWorks Model
   Understanding the Bevel Gear Hub Mounting Distance
    bevel gear
    extrude-cut feature
    extrude-cut through
Basic gear geometry
Basis
    gear geometry
Belt pitch
Belt Pulley
    create
    Creating
Belt Pulley Options
Belt pulleys
Belt Pulleys tab
    Select
Belt width
Between Pins Example
Bevel gear
   Creating a Bevel Gear
   Introduction: GearTrax/SolidWorks Model
   Understanding the Bevel Gear Hub Mounting Distance
    base feature
    create
    Creating
    gear creates
Bevel Gear Hub Mounting Distance
    Understanding
Bevel Gear Meshes
    Recommended Normal Backlash
Bevel gear nomenclature
    Geometry
Bevel Gear Options
Bevel gears
   Creating an Excel Data Sheet
   Recommended Normal Backlash for Bevel Gear Meshes
    AGMA Recommended backlash range
Bevel Gears tab
Bit map file
Bore
   Adding a mounting style to the Gear or Pulley
   Introduction: GearTrax/SolidWorks Model
    drawn only
    split-tapered bushing
Bores
    tapered bushing
Box
   Adding a mounting style to the Gear or Pulley
   Creating a Belt Pulley
   Creating a Chain Sprocket
   Creating a Helical Gear
   Creating a Non-Standard Spline
   Creating an Enlarged Pinion with a Standard Gear
   Creating Non-Standard Pitch Spur Gears
   Inserting a Drawing Annotation
   Spur Gear Options
    gear
Box 8270
Box Use
    check
Boxes
   Bevel Gear Options
   Creating a Helical Gear
   Helical Gear Options
   How does GearTrax store these values?
   Spur Gear Options
   Worm Gear Options
Browse
   Opening and Saving GearTrax filesAllows the user to save and open data they have entered for the current tab.
   Part Template File
   Starting GearTrax
    folder
    location
Browser
Buttons

Calculate
   Calculating a Tooth Thickness
   Calculating Addendum and Clearance Coefficients
   Measurements Options
    coefficients
    tooth thickness
       Calculating a Tooth Thickness
       Measurements Options
    “Over
Calculate over-pin-measurements
Calculate Van Keuren Pin Diameter button
    use
Calculated
   Calculating a Tooth Thickness
   True Involute Form Diameter
   Working Pressure Angle
Calculated tooth thickness
Calculating
    Tooth Thickness
Calculating Addendum
CAM system
   Spur Gear Options
   Tooth Creation
    fabrication
CAM systems
    fabrication
Camnetics NetHASP
    network
Camnetics web site www.camnetics.com
Cancel
   Belt Pulley Options
   Bevel Gear Options
   Gear Belt Options
   GearTrax Options
   General Options
   Helical Gear Options
   NetHASP Check
   Opening and Saving GearTrax filesAllows the user to save and open data they have entered for the current tab.
   Spline Options
   Sprocket Options
   Spur Gear Options
   Worm Gear Options
    cancel
    discard
       Belt Pulley Options
       Bevel Gear Options
       Gear Belt Options
       General Options
       Helical Gear Options
       NetHASP Check
       Spline Options
       Sprocket Options
       Spur Gear Options
       Worm Gear Options
Capture
   Capturing the GearTrax ScreenAllows the user to capture the GearTrax screen
   Copyright Notice
    current GearTrax screen
    GearTrax screen
Capturing
    GearTrax Screen
Case
   Backlash
   Recommended Normal Backlash for Bevel Gear Meshes
    10 Dp gear
    choice
Cbore
CD
    libraries
Center
   Between Pins Example
   Inserting a Spline Tooth Profile
   Introduction: GearTrax/SolidWorks Model
    created through
    gear
       Between Pins Example
       Introduction: GearTrax/SolidWorks Model
    point
    spline
Center distance
   Creating an Enlarged Pinion with a Standard Gear
   Setting the helix angle by specifying the center distance
   Tooth Thinning
    specifying
Center distance text box
Centered
Centerline
    Add
    end point
    length
Chain Sprocket
    create
    Creating
Change
   Addendum Modification
   Creating a Belt Pulley
   Creating a Bevel Gear
   Creating a Chain Sprocket
   Creating a Gear Belt Pulley
   Creating a Helical Gear
   Creating a Spur Gear
   Creating a Worm Gear
   Creating Involute Splines
   GearTrax Options
   Inserting a Drawing Annotation
   Modification of Parts
   Select Company Standards for Addendum, Clearance and Fillet Radius Coefficients
   Selecting an AGMA Backlash Range for Spur Gears
   Setting the Length Units
   Tooth Thinning
    backlash
    designation
    diametral pitch
    letter
    number
       Creating a Belt Pulley
       Creating a Bevel Gear
       Creating a Chain Sprocket
       Creating a Gear Belt Pulley
       Creating a Helical Gear
       Creating a Spur Gear
       Creating a Worm Gear
       Creating Involute Splines
    SolidWorks part unit setting
    space width
    title
    tooth width
Changed using SolidWorks
   Creating a Helical Gear
   Creating a Spur Gear
Changes
   Belt Pulley Options
   Bevel Gear Options
   Gear Belt Options
   GearTrax Options
   General Options
   Helical Gear Options
   NetHASP Check
   Setting the helix angle by specifying the center distance
   Spline Options
   Sprocket Options
   Spur Gear Options
   Worm Gear Options
    helix
    make
Changing
    pressure
Check
   Adding a mounting style to the Gear or Pulley
   Bevel Gear Options
   Creating a Belt Pulley
   Creating a Bevel Gear
   Creating a Chain Sprocket
   Creating a Gear Belt Pulley
   Creating a Helical Gear
   Creating a Spur Gear
   Creating a Worm Gear
   How does GearTrax store these values?
   Inserting a Drawing Annotation
   NetHASP Check
   Reading an Excel Data Sheet
   Spur Gear Options
   Version Check
    box Use
    Create Tooth Pattern
       Creating a Bevel Gear
       Creating a Chain Sprocket
       Creating a Gear Belt Pulley
       Creating a Helical Gear
       Creating a Spur Gear
       Creating a Worm Gear
    Deep groove box
    Draw Flange
    more recent release
    multiple
    NetHASP
    Place
    Placing
    Pointed Tooth check box
    Select
    Split Tapered Bushing button
    tooth space center place
Check box
Check boxes
   Belt Pulley Options
   Bevel Gear Options
   Gear Belt Options
   Helical Gear Options
   Spline Options
   Sprocket Options
   Spur Gear Options
   Worm Gear Options
    desired
       Belt Pulley Options
       Bevel Gear Options
       Gear Belt Options
       Helical Gear Options
       Spline Options
       Sprocket Options
       Spur Gear Options
       Worm Gear Options
Checking
Checking External
   Copyright Notice
   General Formula for Checking External and Internal Spur Gears by Measurement over Pins
    General Formula
Choice
   Introduction: GearTrax/SolidWorks Model
   Recommended Normal Backlash for Bevel Gear Meshes
    case
Circle
   Between Pins Example
   Introduction: GearTrax/SolidWorks Model
    Add
Circles
    pair
Circular pitch
Circular tooth thickness
   Backlash
   Creating a Bevel Gear
CirPattern1
   Creating a Bevel Gear
   Creating a Chain Sprocket
Class
   Creating Involute Splines
   Spur Gear Options
    select
    Selecting
Class fit
Class option
   Bevel Gear Options
   Helical Gear Options
   Spur Gear Options
   Worm Gear Options
    Selecting
       Bevel Gear Options
       Helical Gear Options
       Spur Gear Options
       Worm Gear Options
Clearance
   Copyright Notice
   Select Company Standards for Addendum, Clearance and Fillet Radius Coefficients
Clearance coefficient
Clearance Coefficients
Clicking
   Creating a Helical Gear
   Normal pressure angle verses transverse pressure angle
   Selecting a Manufacturing Method for Spur/Helical Gears
    picture
Clip board
    Empty
Clipboard
    Empty
Close
    sketch
Coarse
Coefficient
Coefficients
    calculate
Company Standards tab
   Calculating Addendum and Clearance Coefficients
   Select Company Standards for Addendum, Clearance and Fillet Radius Coefficients
Complete
   Adding a mounting style to the Gear or Pulley
   Creating a Belt Pulley
   Creating a Bevel Gear
   Creating a Chain Sprocket
   Creating a Gear Belt Pulley
   Creating a Helical Gear
   Creating a Spur Gear
   Creating a Worm Gear
   PGT Tooth Form
    Finish button
       Adding a mounting style to the Gear or Pulley
       Creating a Belt Pulley
       Creating a Bevel Gear
       Creating a Chain Sprocket
       Creating a Gear Belt Pulley
       Creating a Helical Gear
       Creating a Spur Gear
       Creating a Worm Gear
Conjunction
Constructed tangent
    back cone surface
Contact Ratio
    view
Contents
    custom
Convert splines
    series
Copies
Copyright Notice
Correct backlash
Cos
   Normal pressure angle verses transverse pressure angle
   Transverse diametral pitch verses normal diametral pitch
Counter bore
Create
   Auxiliary Sketches
   Between Pins Example
   Bevel Gear Options
   Creating a Belt Pulley
   Creating a Bevel Gear
   Creating a Chain Sprocket
   Creating a Gear Belt Pulley
   Creating a Helical Gear
   Creating a Non-Standard Spline
   Creating a Spur Gear
   Creating a Spur Gear Rack
   Creating a Worm Gear
   Creating an Enlarged Pinion with a Standard Gear
   Creating an Excel Data Sheet
   Creating Involute Splines
   Inserting a Spline Tooth Profile
   Internal Gear Sets
   Sending the Custom Information to an Excel data sheet
   Spur Gear Options
   Tooth Creation
   Tooth Pattern
   Understanding the Bevel Gear Hub Mounting Distance
   Worm Gear Options
    belt pulley
    bevel gear
    chain sprocket
    enlarged pinion
    Excel data sheet
    extruded
    gear belt pulley
    GearTrax
    generic spur rack
    helical gear
    new sketch
    non-standard spline
    offset entity equal
    part
    setting GearTrax
    sketch
    spiral bevel gear place
    spur gear
    spur gear rack
    tooth profile
       Bevel Gear Options
       Spur Gear Options
       Tooth Pattern
       Worm Gear Options
    worm gear
Create solid models
    SolidWorks API
Create Tooth Pattern
   Creating a Bevel Gear
   Creating a Chain Sprocket
   Creating a Gear Belt Pulley
   Creating a Helical Gear
   Creating a Spur Gear
   Creating a Worm Gear
    Check
       Creating a Bevel Gear
       Creating a Chain Sprocket
       Creating a Gear Belt Pulley
       Creating a Helical Gear
       Creating a Spur Gear
       Creating a Worm Gear
Create tooth profiles
Created using Excel
Creating
   Copyright Notice
   Creating a Belt Pulley
   Creating a Bevel Gear
   Creating a Chain Sprocket
   Creating a Gear Belt Pulley
   Creating a Helical Gear
   Creating a Non-Standard Spline
   Creating a Spur Gear
   Creating a Spur Gear Rack
   Creating a Worm Gear
   Creating an Enlarged Pinion with a Standard Gear
   Creating an Excel Data Sheet
   Getting more information about the Spline
   How does GearTrax store these values?
   Spur Gear Options
    Belt Pulley
    Bevel Gear
    Chain Sprocket
    Enlarged Pinion
    Excel Data Sheet
    gear
    Gear Belt Pulley
    Helical Gear
    Non-Standard Spline
    Spur Gear
    Spur Gear Rack
    tooth
    Worm Gear
Creating helical gears
   Normal pressure angle verses transverse pressure angle
   Transverse diametral pitch verses normal diametral pitch
Creating Involute Splines
Creating non-standard gears
Creating Non-Standard Pitch Spur Gears
Creation
   2d Spline Creation Over ride
   Auxiliary Sketches
   How does GearTrax store these values?
    gear
    ride
    specify
Critical
    life
CT 06040-0270
Custom
   How does GearTrax store these values?
   Inserting a Drawing Annotation
   Sending the Custom Information to an Excel data sheet
    contents
    delete
Custom Information
    Sending
Custom Information data
Custom Properties
    desired set
    part
Custom tab
Customize Belt Pulleys
    drawings
Customize Bevel Gear Annotations
    drawings
Customize Gear Belt Annotations
    drawings
Customize GearTrax options
Customize Helical Gear Annotations
    drawings
Customize Spline Annotations
    drawings
Customize Sprocket Annotations
    drawings
Customize Spur Gear Annotations
    drawings
Customize Worm Gear Annotations
    drawings
Cut
   Introduction: GearTrax/SolidWorks Model
   Understanding the Bevel Gear Hub Mounting Distance
Cutter
   Normal pressure angle verses transverse pressure angle
   Transverse diametral pitch verses normal diametral pitch
    normal
       Normal pressure angle verses transverse pressure angle
       Transverse diametral pitch verses normal diametral pitch
Cutting
    tooth
    tooth profile

D/N
Data
   Between Pins Example
   Sending the Custom Information to an Excel data sheet
    current SolidWorks part file
Data sheet
   Reading an Excel Data Sheet
   Sending the Custom Information to an Excel data sheet
    Select Read
Dedendum
   Calculating Addendum and Clearance Coefficients
   Creating Non-Standard Pitch Spur Gears
   DIN-867 Standard
   JIS B 1701-1973 Standard
   Tooth Thinning
Dedendum circle
Dedendum diameter
Dedendum modification
Dedendum modification coefficient
Deep groove box
    Check
Default
    standard
Define
   Inserting a Drawing Annotation
   Introduction: GearTrax/SolidWorks Model
    spline
Defined
   Normal pressure angle verses transverse pressure angle
   Tooth Creation
   Transverse diametral pitch verses normal diametral pitch
Defining
Definition
   Creating a Bevel Gear
   Creating a Chain Sprocket
   Creating a Helical Gear
   Creating a Spur Gear
   Creating a Worm Gear
    editing
       Creating a Bevel Gear
       Creating a Chain Sprocket
       Creating a Helical Gear
       Creating a Spur Gear
       Creating a Worm Gear
Degree pressure
Degrees
   DIN-867 Standard
   JIS B 1701-1973 Standard
Delay
    startup
Delete
   Inserting a Drawing Annotation
   Updating a Spline
    custom
Delete key
    Press
Design
Designation
    change
Determine
    size
Deviation
Dialog box
   Belt Pulley Options
   Bevel Gear Options
   Gear Belt Options
   General Options
   Getting more information about the Spline
   Helical Gear Options
   NetHASP Check
   Spline Options
   Sprocket Options
   Spur Gear Options
   Worm Gear Options
    exit
       Belt Pulley Options
       Bevel Gear Options
       Gear Belt Options
       General Options
       Helical Gear Options
       NetHASP Check
       Spline Options
       Sprocket Options
       Spur Gear Options
       Worm Gear Options
    open
Diameter
   Auxiliary Sketches
   How does GearTrax store these values?
   Introduction: GearTrax/SolidWorks Model
    enter
Diametral pitch
   Calculating a Tooth Thickness
   Creating a Helical Gear
   Creating a Spur Gear
   Creating Non-Standard Pitch Spur Gears
   Diametral Pitch verses Module
    change
Diametral Pitch verses Module
Diametral pitches
Dimension
    adding
    circle equal
DIN standards
DIN-867 Standard
Direction
   Creating a Bevel Gear
   Creating a Worm Gear
    Select
Disabled
Discard
   Belt Pulley Options
   Bevel Gear Options
   Gear Belt Options
   General Options
   Helical Gear Options
   NetHASP Check
   Spline Options
   Sprocket Options
   Spur Gear Options
   Worm Gear Options
    Cancel
       Belt Pulley Options
       Bevel Gear Options
       Gear Belt Options
       General Options
       Helical Gear Options
       NetHASP Check
       Spline Options
       Sprocket Options
       Spur Gear Options
       Worm Gear Options
Display
   Creating a Worm Gear
   Creating Non-Standard Pitch Spur Gears
   Inserting a Drawing Annotation
    current coefficient
    Insert Annotations
    recommended minimum face width
Displayed
   Measurements Options
   Normal pressure angle verses transverse pressure angle
   Spur Gear Options
    external spur gears
Document
Double
   Opening and Saving GearTrax filesAllows the user to save and open data they have entered for the current tab.
   Part Template File
Draw Auxiliary Sketches check box
    Select
Draw Flange
    Check
Drawing
   Belt Pulley Options
   Bevel Gear Options
   Gear Belt Options
   Helical Gear Options
   How does GearTrax store these values?
   Inserting a Drawing Annotation
   Spline Options
   Sprocket Options
   Spur Gear Options
   Worm Gear Options
    created
       Belt Pulley Options
       Bevel Gear Options
       Gear Belt Options
       Helical Gear Options
       Spline Options
       Sprocket Options
       Spur Gear Options
       Worm Gear Options
Drawing Annotation
   Copyright Notice
   How does GearTrax store these values?
   Inserting a Drawing Annotation
    Inserting
    See Inserting
Drawings
   Belt Pulley Options
   Bevel Gear Options
   Gear Belt Options
   Helical Gear Options
   Spline Options
   Sprocket Options
   Spur Gear Options
   Worm Gear Options
    customize Belt Pulleys
    customize Bevel Gear Annotations
    customize Gear Belt Annotations
    customize Helical Gear Annotations
    customize Spline Annotations
    customize Sprocket Annotations
    customize Spur Gear Annotations
    customize Worm Gear Annotations
Drawn
   Adding a mounting style to the Gear or Pulley
   Creating a Belt Pulley
   Creating a Bevel Gear
   Creating a Chain Sprocket
   Creating a Helical Gear
   Creating a Spur Gear
   Creating a Worm Gear
   Introduction: GearTrax/SolidWorks Model
    second side
    sketch
Drive component
Driven dimension
   Creating a Belt Pulley
   Creating a Chain Sprocket
   Creating a Gear Belt Pulley
Driven dimensions
Driving gear
   Approach Length
   Recess Length
Drop down box
   Adding a mounting style to the Gear or Pulley
   Bevel Gear Options
   Creating a Belt Pulley
   Creating a Bevel Gear
   Creating a Chain Sprocket
   Creating a Gear Belt Pulley
   Creating a Helical Gear
   Creating a Non-Standard Spline
   Creating a Worm Gear
   Creating Involute Splines
   Helical Gear Options
   SolidWorks Version
   Spur Gear Options
   Worm Gear Options
    enter
    Use
       Creating Involute Splines
       SolidWorks Version
Dump
    GearTrax menu
Duplicated

Edit
Edited
   Creating a Helical Gear
   Creating a Non-Standard Spline
Editing
   Creating a Bevel Gear
   Creating a Chain Sprocket
   Creating a Helical Gear
   Creating a Spur Gear
   Creating a Worm Gear
   To modify an existing part:
    definition
       Creating a Bevel Gear
       Creating a Chain Sprocket
       Creating a Helical Gear
       Creating a Spur Gear
       Creating a Worm Gear
Editions
Effect
    gear creation
Effects
    outside diameter
Email
Empty
    Clip Board
    Clipboard
Enable
    Number
End point
    centerline
Enlarged
Enlarged Pinion
   Copyright Notice
   Creating an Enlarged Pinion with a Standard Gear
    create
    Creating
    model
Enlarged pinion check box
Enlarged pinion-standard gear check box
    Select
Enlarged pinion-standard gear set
Enter
   Adding a mounting style to the Gear or Pulley
   Calculating a Tooth Thickness
   Calculating Addendum and Clearance Coefficients
   Creating a Belt Pulley
   Creating a Bevel Gear
   Creating a Chain Sprocket
   Creating a Gear Belt Pulley
   Creating a Helical Gear
   Creating a Spur Gear
   Creating a Worm Gear
   Creating Involute Splines
   How does GearTrax store these values?
   Inserting a Drawing Annotation
   Opening and Saving GearTrax filesAllows the user to save and open data they have entered for the current tab.
   Selecting an AGMA Backlash Range for Spur Gears
   Setting the helix angle by specifying the center distance
   Spur Gear Options
   Tooth Pattern
   Topping Adjustment
    backlash
    desired helix
    diameter
    drop down box
    file name
    K Factor
    letter
    minimum modification recommended
    number
    pitch
    topping
Entering
   Adding a mounting style to the Gear or Pulley
   Creating a Worm Gear
   Measurements Options
    negative number
    pin diameter
Entities
    fix
Equal
    twice
Example
   Creating Non-Standard Pitch Spur Gears
   Diametral Pitch verses Module
   Modification of Parts
Excel
   Reading an Excel Data Sheet
   Sending the Custom Information to an Excel data sheet
Excel Data Sheet
   Creating an Excel Data Sheet
   Reading an Excel Data Sheet
   Sending the Custom Information to an Excel data sheet
    create
    Creating
    read
    Reading
Excel format
   Reading an Excel Data Sheet
   Sending the Custom Information to an Excel data sheet
Excel spread sheet
    SolidWorks part file
Existing part
   Copyright Notice
   To modify an existing part:
    modify
Exit
   Belt Pulley Options
   Bevel Gear Options
   Gear Belt Options
   GearTrax Options
   General Options
   Helical Gear Options
   NetHASP Check
   Spline Options
   Sprocket Options
   Spur Gear Options
   Worm Gear Options
    dialog box
       Belt Pulley Options
       Bevel Gear Options
       Gear Belt Options
       General Options
       Helical Gear Options
       NetHASP Check
       Spline Options
       Sprocket Options
       Spur Gear Options
       Worm Gear Options
    options
External Only button
External spline
   Calculating a Tooth Thickness
   Creating Involute Splines
External splines
External spur gears
    displayed
Extrude-cut feature
    base feature
Extruded
    create
Extrusion

Fabricated
Fabrication
    CAM system
    CAM systems
Face
   Between Pins Example
   Creating a Worm Gear
    gear
Face width
   Creating a Bevel Gear
   Creating a Helical Gear
   Creating a Spur Gear
   Creating a Worm Gear
   Creating Non-Standard Pitch Spur Gears
   Face Width
   Modification of Parts
Fashion
Fax
   Copyright Notice
   PGT Tooth Form
File name
    Enter
Fillet Radius
   Creating Non-Standard Pitch Spur Gears
   DIN-867 Standard
   Fillet Radius, Fillet Radius Coefficient
   JIS B 1701-1973 Standard
   Selecting a Manufacturing Method for Spur/Helical Gears
    set
Fillet Radius Coefficient
   Creating Non-Standard Pitch Spur Gears
   Fillet Radius, Fillet Radius Coefficient
Fillet Radius Coefficients
Fillet Radius dialog box
   Creating Non-Standard Pitch Spur Gears
   Fillet Radius, Fillet Radius Coefficient
    Activate
Fine pitch standard
    Select
Finish button
   Adding a mounting style to the Gear or Pulley
   Creating a Belt Pulley
   Creating a Bevel Gear
   Creating a Chain Sprocket
   Creating a Gear Belt Pulley
   Creating a Helical Gear
   Creating a Spur Gear
   Creating a Spur Gear Rack
   Creating a Worm Gear
   Creating Involute Splines
   To modify an existing part:
    complete
       Adding a mounting style to the Gear or Pulley
       Creating a Belt Pulley
       Creating a Bevel Gear
       Creating a Chain Sprocket
       Creating a Gear Belt Pulley
       Creating a Helical Gear
       Creating a Spur Gear
       Creating a Worm Gear
    model
    selecting
First tooth
First tooth cut
    produce
Fit
Fix
    entities
Fix Involute Sketch
Fixing
Flanges
   Creating a Gear Belt Pulley
   Introduction: GearTrax/SolidWorks Model
Folder
   Opening and Saving GearTrax filesAllows the user to save and open data they have entered for the current tab.
   Starting GearTrax
    Browse
    GearTrax
Force GearTrax
    use coefficients
Form
    mid-plane extruded
Form diameter
Formats using MS Paint
Forms
Full
   Modification of Parts
   Selecting a Manufacturing Method for Spur/Helical Gears
Full fillet radius
Full pattern
   Creating a Bevel Gear
   Creating a Chain Sprocket
   Creating a Helical Gear
   Creating a Spur Gear
   Creating a Worm Gear
Functioning

Gage
Gear
   Addendum Modification
   Adding a mounting style to the Gear or Pulley
   Backlash
   Between Pins Example
   Calculating a Tooth Thickness
   Calculating Addendum and Clearance Coefficients
   Creating a Belt Pulley
   Creating a Bevel Gear
   Creating a Chain Sprocket
   Creating a Helical Gear
   Creating a Spur Gear
   Creating a Spur Gear Rack
   Creating a Worm Gear
   Creating Non-Standard Pitch Spur Gears
   Diametral Pitch verses Module
   Fix Involute Sketch
   How does GearTrax store these values?
   Inserting a Tooth Profile Sketch
   Introduction: GearTrax/SolidWorks Model
   Modification of Parts
   Spur Gear Options
   To modify an existing part:
   Tooth Thinning
   Topping Adjustment
    box
    center
       Between Pins Example
       Introduction: GearTrax/SolidWorks Model
    Creating
    creation
    extrude-cut though
    face
    insert
    OD
    other features
    other parts
    profile
    teeth
       Creating a Helical Gear
       Creating a Spur Gear
Gear belt
Gear Belt Options
Gear Belt Pulley
    create
    Creating
Gear Belts tab
    Select
Gear construction
    parameters
Gear creation
    effect
Gear geometry
   Creating Non-Standard Pitch Spur Gears
   Tooth Creation
    basis
Gear ratio
Gear set
   Addendum Modification
   Creating a Bevel Gear
   Internal Gear Sets
   Working Pressure Angle
    performance
Gear Standard
    Selecting
Gear teeth
    Minimum number
Gear tooth
Gear type
Gear Type Selection
Gears
   Backlash
   Creating a Helical Gear
   Recommended Normal Backlash for Bevel Gear Meshes
GearTrax file
    open
    save
GearTrax forms
GearTrax length setting
GearTrax menu
   Inserting a Spline Tooth Profile
   Sending the Custom Information to an Excel data sheet
    dump
GearTrax model
    standard setscrew hole
GearTrax Options
GearTrax Screen
    capture
    Capturing
GearTrax setting
GearTrax supports
GearTrax tools menu
GearTrax/SolidWorks Model
General Formula
    Checking External
General Options
General tab
   2d Spline Creation Over ride
   Auxiliary Sketches
   Fix Involute Sketch
   General Options
   NetHASP Check
   Part Template File
   SolidWorks Version
   Tooth Pattern
   Version Check
    Select
       2d Spline Creation Over ride
       Auxiliary Sketches
       Fix Involute Sketch
       General Options
       NetHASP Check
       Part Template File
       SolidWorks Version
       Tooth Pattern
       Version Check
Generate
Generating
    tooth form
Generic spur rack
    create
Geometry
   Geometry of bevel gear nomenclature.
   Getting more information about the Spline
   Introduction: GearTrax/SolidWorks Model
   Spur Gear Options
    bevel gear nomenclature
Green
Grooves

Hand
    spiral
Heat treatment
Heavy Series
    sprocket
Helical
   Creating a Helical Gear
   Measurements Options
Helical direction
Helical Gear
    create
    Creating
Helical Gear Options
Helical gears
   Introduction: GearTrax/SolidWorks Model
   Select Company Standards for Addendum, Clearance and Fillet Radius Coefficients
Helical Gears tab
    Select
Helical L.H.
   Creating a Helical Gear
   Gear Type Selection
Helical R.H.
   Creating a Helical Gear
   Gear Type Selection
    Gear Type box select either
Helical set
Helix
   Creating a Helical Gear
   Introduction: GearTrax/SolidWorks Model
   Normal pressure angle verses transverse pressure angle
   Setting the helix angle by specifying the center distance
   Transverse diametral pitch verses normal diametral pitch
    changes
    Selecting helix gear type enables
    set
Helix angle
    Setting
Help
   Addendum Modification
   Tooth Creation
Help section
Hide
Hob
   DIN-867 Standard
   JIS B 1701-1973 Standard
   Selecting a Manufacturing Method for Spur/Helical Gears
Hobbing
Horizontal surface
    placed
Hub
Hub mounting
   Creating a Belt Pulley
   Creating a Bevel Gear
   Creating a Chain Sprocket
   Creating a Gear Belt Pulley
   Creating a Helical Gear
   Creating a Spur Gear
   Creating a Worm Gear
    necessary changes
       Creating a Belt Pulley
       Creating a Bevel Gear
       Creating a Chain Sprocket
       Creating a Gear Belt Pulley
       Creating a Helical Gear
       Creating a Spur Gear
       Creating a Worm Gear
Hub mounting distance
Hub Mounting Surface
Hub projection
Hub/cbore 2nd side
Hubs

INC
Increase
   Selecting a Manufacturing Method for Spur/Helical Gears
   Spur Gear Options
    dedendum slightly
    performance
Index
    next standard
Input
   Creating a Bevel Gear
   Creating a Chain Sprocket
   Creating a Helical Gear
   Creating a Spur Gear
   Creating a Worm Gear
    number
       Creating a Bevel Gear
       Creating a Chain Sprocket
       Creating a Helical Gear
       Creating a Spur Gear
       Creating a Worm Gear
Insert Annotations
    display
Inserting
   Inserting a Drawing Annotation
   Inserting a Spline Tooth Profile
   Inserting a Tooth Profile Sketch
   Updating a Spline
    Annotation
    Drawing Annotation
    gear
    Spline Tooth Profile
    Tooth Profile Sketch
Interference
Internal gear set check box
   Creating a Helical Gear
   Creating a Spur Gear
   Internal Gear Sets
    Select
Internal Gear Sets
Internal Only button
    spline select
Internal Spur Gears
   Copyright Notice
   General Formula for Checking External and Internal Spur Gears by Measurement over Pins
Interrupting
    modeling process
Introduction

JIS B 1701-1973 Standard

K Factor
    Enter
Keyway
   Introduction: GearTrax/SolidWorks Model
   Spur Gear Options
    left unchecked
    position
Keyway Position
Keyway style
    Selecting

Larger
   Creating a Helical Gear
   Creating a Spur Gear
Left-hand helix
Length
   Approach Length
   Between Pins Example
   Face Width
    centerline
    spur gear set
    spur gear tooth
Length unit
    set
Length Units
    set
    Setting
Lengths
Letter
    change
    Enter
Libraries
    CD
Limit
    wish
Limited
Link
    Select
Loaded
Located
Location
    Browse
Long-addendum pinions

M
Machinerys Handbook
   Creating a Bevel Gear
   Tooth Thinning
Major diameter
   Calculating Addendum and Clearance Coefficients
   Creating a Spur Gear
   Creating Non-Standard Pitch Spur Gears
    affect
Major Diameter dialog box
    Activate
Make
   Creating a Belt Pulley
   Creating a Bevel Gear
   Creating a Chain Sprocket
   Creating a Gear Belt Pulley
   Creating a Helical Gear
   Creating a Spur Gear
   Creating a Worm Gear
   General Options
   Spur Gear Options
   To modify an existing part:
    changes
    necessary changes
    part
Make backup copies
Manual
   Between Pins Example
   PGT Tooth Form
    Sample
Manual changes
Manual modifications
    part
Manually change
    need
Manually changed
Manually download
    need
Manually extrude cut
    sketch using SolidWorks
Manufacturing Method
    Selecting
    specify
Manufacturing methods
Manufacturing tab
Manufacturing tolerances
Mated
Mates
Mating gear
   Creating a Bevel Gear
   Tooth Thinning
Mating teeth
    backlash between
Maximum
Maximum distances
Measured
Measurement
   Copyright Notice
   General Formula for Checking External and Internal Spur Gears by Measurement over Pins
   How does GearTrax store these values?
   Measurements Options
    GearTrax places
Measurements Options
Measurements tab
   Calculating a Tooth Thickness
   Measurements Options
    Open
    Select
Message
    return
Methods
Metric
Mid-plane cut-extruded
Mid-plane extruded
    form
Millimeters
Min/Max Hub Mounting
    between
Minimum
    between
Minimum modification recommended
    enter
Minimum number
    gear teeth
Minor diameter
   Calculating Addendum and Clearance Coefficients
   Creating Non-Standard Pitch Spur Gears
Minor Diameter dialog box
    Activate
Model
   Auxiliary Sketches
   Creating a Spur Gear Rack
   Creating a Worm Gear
   Creating an Enlarged Pinion with a Standard Gear
   Fix Involute Sketch
   How does GearTrax store these values?
    enlarged pinion
    Finish button
    Gear only
Modeled
Modeled properly
Modeling process
    interrupting
Modification
   Bevel Gear Options
   Creating an Enlarged Pinion with a Standard Gear
   Creating Non-Standard Pitch Spur Gears
   Modification of Parts
   Spur Gear Options
    Parts
    pinion
Modification coefficient
   Addendum Modification Coefficients
   Creating an Enlarged Pinion with a Standard Gear
   Creating Non-Standard Pitch Spur Gears
   Spur Gear Options
Modified
   Fillet Radius, Fillet Radius Coefficient
   Modification of Parts
   Tooth Thinning
Modified manually
Modify
   Bevel Gear Options
   Modification of Parts
   To modify an existing part:
    existing part
    part
    tooth profile
Module
   Calculating a Tooth Thickness
   Creating a Helical Gear
   Creating a Spur Gear
   Diametral Pitch verses Module
   DIN-867 Standard
   JIS B 1701-1973 Standard
Module m
Module pitch
   Creating Non-Standard Pitch Spur Gears
   Diametral Pitch verses Module
Module pitch box displays
    normal module
Module pitches
Module transverse pitch
Mounting
   Creating a Bevel Gear
   Introduction: GearTrax/SolidWorks Model
Mounting holes
Mounting style
    Adding
    Select
Mounting tab
   Adding a mounting style to the Gear or Pulley
   Spur Gear Options
Move
    Program Files
MS Paint
Multi-strand sprocket
Multi-strands
Multiple
    Check
Multiple teeth
    single part
Multiple tooth profiles

N/D
Name
    open
Negative number
    entering
NetHASP
    check
NetHASP Check
Network
    Camnetics NetHASP
New features
    adding
New GearTrax part
    starting
New offset entities
New part
   Setting the Length Units
   To modify an existing part:
New settings
    register
New sheet
New sketch
   Between Pins Example
   Inserting a Spline Tooth Profile
    Create
    Start
New sketch In SolidWorks
    Start
No Class option
    Fit frame select
Nomenclature
Non-standard pitches
Non-Standard Spline
    create
    Creating
Normal
   Normal pressure angle verses transverse pressure angle
   Transverse diametral pitch verses normal diametral pitch
    cutter
       Normal pressure angle verses transverse pressure angle
       Transverse diametral pitch verses normal diametral pitch
Normal diametral pitch
Normal diametral pitches
Normal module
    Module pitch box displays
Normal pitch
    Diametral pitch box displays
Normal pressure
   Normal pressure angle verses transverse pressure angle
   Working Pressure Angle
Notify
Number
   Calculating a Tooth Thickness
   Creating a Belt Pulley
   Creating a Bevel Gear
   Creating a Chain Sprocket
   Creating a Gear Belt Pulley
   Creating a Helical Gear
   Creating a Spur Gear
   Creating a Spur Gear Rack
   Creating a Worm Gear
   Creating Involute Splines
   Creating Non-Standard Pitch Spur Gears
   Diametral Pitch verses Module
   Measurements Options
   Modification of Parts
    change
       Creating a Belt Pulley
       Creating a Bevel Gear
       Creating a Chain Sprocket
       Creating a Gear Belt Pulley
       Creating a Helical Gear
       Creating a Spur Gear
       Creating a Worm Gear
       Creating Involute Splines
    enable
    Enter
    gear teeth divided
    input
       Creating a Bevel Gear
       Creating a Chain Sprocket
       Creating a Helical Gear
       Creating a Spur Gear
       Creating a Worm Gear
    Multi groove check box enables
    Set
    Specify
    teeth
       Creating a Gear Belt Pulley
       Creating a Spur Gear Rack
       Creating Non-Standard Pitch Spur Gears
       Diametral Pitch verses Module
       Measurements Options
       Modification of Parts
    teeth created
    threads

O.D
Obtain
    order
OD
    gear
Odd number
    teeth
Offset entity
Open
   Approach Length
   Calculating a Tooth Thickness
   Contact Ratio
   Getting more information about the Spline
   Opening and Saving GearTrax filesAllows the user to save and open data they have entered for the current tab.
   Recess Length
   Selecting an AGMA Backlash Range for Spur Gears
   Sending the Custom Information to an Excel data sheet
   Updating a Spline
    Addendum mod dialog box
       Approach Length
       Contact Ratio
       Recess Length
    Backlash dialog box
    dialog box
    GearTrax file
    Measurements tab
    name
    Open button
    tooth sketch
Open button
   Opening and Saving GearTrax filesAllows the user to save and open data they have entered for the current tab.
   Starting GearTrax
    open
Open data
Open option
Opening
Opposite hand
Option
   Auxiliary Sketches
   Bevel Gear Options
   NetHASP Check
Option button
   Creating Non-Standard Pitch Spur Gears
   Spline Options
Option set
Options
   2d Spline Creation Over ride
   Auxiliary Sketches
   Belt Pulley Options
   Bevel Gear Options
   Fix Involute Sketch
   Gear Belt Options
   GearTrax Options
   General Options
   Helical Gear Options
   Inserting a Drawing Annotation
   Measurements Options
   NetHASP Check
   Part Template File
   SolidWorks Version
   Sprocket Options
   Spur Gear Options
   Tooth Creation
   Tooth Pattern
   Version Check
   Worm Gear Options
    exit
    setting
Options menu
Order
    obtain
Origin
   Creating a Spur Gear Rack
   Inserting a Spline Tooth Profile
Outside diameter
   Creating a Helical Gear
   Creating a Spur Gear
   Introduction: GearTrax/SolidWorks Model
   Topping Adjustment
    effects
    other defining
    single circle defining
Outside diameters
Outside profile
    Revolving

P.O.
Pair
   Introduction: GearTrax/SolidWorks Model
   Tooth Creation
    circles
    splines
Parallel
Parameter
Parameters
    gear construction
Parametrically changed
Part
   Creating a Bevel Gear
   Creating a Chain Sprocket
   Creating a Helical Gear
   Creating a Spur Gear
   Creating a Worm Gear
   How does GearTrax store these values?
   Inserting a Drawing Annotation
   Inserting a Spline Tooth Profile
   To modify an existing part:
   Updating a Spline
    Changes made
    create
    Custom Properties
    Make
    manual modifications
    Modify
    properties
    rebuild
Part file
   Belt Pulley Options
   Bevel Gear Options
   Gear Belt Options
   Helical Gear Options
   Sending the Custom Information to an Excel data sheet
   Spline Options
   Sprocket Options
   Spur Gear Options
   Worm Gear Options
Part model
    GearTrax creates
Part Template File
Parts
    Modification
Paste
Pattern
   Creating a Bevel Gear
   Creating a Chain Sprocket
   Creating a Helical Gear
   Creating a Spur Gear
   Creating a Worm Gear
   Inserting a Tooth Profile Sketch
   Introduction: GearTrax/SolidWorks Model
    desired
       Creating a Bevel Gear
       Creating a Chain Sprocket
       Creating a Helical Gear
       Creating a Spur Gear
       Creating a Worm Gear
    tooth cut using SolidWorks
Patterned
   Creating a Bevel Gear
   Creating a Chain Sprocket
   Creating a Gear Belt Pulley
   Creating a Helical Gear
   Creating a Spur Gear
   Creating a Worm Gear
   Introduction: GearTrax/SolidWorks Model
Patterning worm gear teeth
Pd
Per-string character
    Set
Performance
   Addendum Modification
   Spur Gear Options
    gear set
    increase
PGT
PGT Tooth Form
   Addendum Modification
   PGT Tooth Form
    See
Picture
    clicking
Pin center point
Pin diameter
   Between Pins Example
   Calculating a Tooth Thickness
   Measurements Options
    entering
    Specify
Pin Diameter text box
Pin diameters
Pin dimension
Pin Measurement
Pin measurement text boxes
    under
Pin measurements
Pin outside diameter
Pin size
Pin sizes
    standard
Pinion
   Addendum Modification
   Approach Length
   Backlash
   Calculating a Tooth Thickness
   Calculating Addendum and Clearance Coefficients
   Creating a Helical Gear
   Creating a Spur Gear
   Creating a Spur Gear Rack
   Creating an Enlarged Pinion with a Standard Gear
   Recess Length
   Spur Gear Options
   Tooth Thinning
   Topping Adjustment
    assumes
       Approach Length
       Recess Length
    modification
    positive
    teeth
    tooth thickens
Pinions
Pins
   Between Pins Example
   General Formula for Checking External and Internal Spur Gears by Measurement over Pins
Pins dimension
Pitch
    Enter
Pitch Apex
Pitch circle
Pitch diameter
   Auxiliary Sketches
   Calculating Addendum and Clearance Coefficients
   Creating a Chain Sprocket
   Creating a Gear Belt Pulley
   Creating Non-Standard Pitch Spur Gears
   Diametral Pitch verses Module
Pitch Diameter box
Pitch diameter changes
Pitch diameter per tooth
    mm
Pitch line
Plane
   Introduction: GearTrax/SolidWorks Model
   Normal pressure angle verses transverse pressure angle
   Transverse diametral pitch verses normal diametral pitch
    rotation
       Normal pressure angle verses transverse pressure angle
       Transverse diametral pitch verses normal diametral pitch
    tooth profile
Plastic gears
Point
   Between Pins Example
   Introduction: GearTrax/SolidWorks Model
    Add
    center
Pointed Tooth check box
    Check
Points
   Introduction: GearTrax/SolidWorks Model
   Tooth Creation
    series
       Introduction: GearTrax/SolidWorks Model
       Tooth Creation
Portions
Position
    keyway
Positioned
    tooth center
Positive
    pinion
Pressure
   Addendum Modification
   Creating Involute Splines
   Creating Non-Standard Pitch Spur Gears
   Normal pressure angle verses transverse pressure angle
    changing
    Select
    tangent
    upper right hand corner
Pressure Angle dialog box
    Activate
Prevent unintentional dragging
    sketch points
Previously created
Price
Procedure
Produce
   Introduction: GearTrax/SolidWorks Model
   Selecting a Manufacturing Method for Spur/Helical Gears
    first tooth cut
Product
   Copyright Notice
   Inserting a Drawing Annotation
Product being modeled
Profile
    created revolving
    gear
Program Files
    move
Prohibits
Properties
   Copyright Notice
   How does GearTrax store these values?
    part
Protected
Pull down menu
   2d Spline Creation Over ride
   Auxiliary Sketches
   Fix Involute Sketch
   GearTrax Options
   General Options
   NetHASP Check
   Part Template File
   Setting the Length Units
   SolidWorks Version
   Tooth Pattern
   Version Check
Pulley
   Adding a mounting style to the Gear or Pulley
   Creating a Gear Belt Pulley
Pulley O.D.
Pulleys

Rack
Read
    attempt
    Excel data sheet
Reading
    Excel Data Sheet
Real pressure
    effectively
Rebuild
    part
Rebuilds
    require more time
Recalculated using
    Van Keuren Pin Diameters
Recalculating using
    Van Keuren pin diameter during
Recess Length
    view
Recommended minimum face width
    display
Recommended Normal Backlash
    Bevel Gear Meshes
Record button
    Press
Recreated
Redraw
    tooth profile
Reduce
    frequently necessary
Reduced
Reduction
Register
    new settings
Registered
Registering
Registration codes
Related
   Creating a Non-Standard Spline
   Getting more information about the Spline
Relief
   Approach Length
   Recess Length
Require
    least
Require modification
Require more time
    rebuilds
Results
Return
    message
Review
    want
Revolve
Revolve properly
Revolved
Revolved base feature
    loft cut through
Revolving
    outside profile
    shape
Ride
    creation
Right
    right hand gears teeth lean
Root
   Creating a Non-Standard Spline
   Creating Involute Splines
    Select
Rotation
   Normal pressure angle verses transverse pressure angle
   Transverse diametral pitch verses normal diametral pitch
    plane
       Normal pressure angle verses transverse pressure angle
       Transverse diametral pitch verses normal diametral pitch
Run
   Recommended Normal Backlash for Bevel Gear Meshes
   Starting GearTrax
    ready
Running

Sample
   Between Pins Example
   Inserting a Drawing Annotation
    manual
    Summary Information window
Save
   Capturing the GearTrax ScreenAllows the user to capture the GearTrax screen
   Opening and Saving GearTrax filesAllows the user to save and open data they have entered for the current tab.
    GearTrax file
    Save button
Save button
    save
Save option
Saved
   Belt Pulley Options
   Bevel Gear Options
   Capturing the GearTrax ScreenAllows the user to capture the GearTrax screen
   Gear Belt Options
   Helical Gear Options
   Spline Options
   Sprocket Options
   Spur Gear Options
   Worm Gear Options
Saving GearTrax files
Second side
    drawn
Second sketch
Section
   ANSI/AGMA Tooth Proportions
   Tooth Thinning
    See
Select
   2d Spline Creation Over ride
   Adding a mounting style to the Gear or Pulley
   Auxiliary Sketches
   Belt Pulley Options
   Between Pins Example
   Bevel Gear Options
   Creating a Belt Pulley
   Creating a Bevel Gear
   Creating a Chain Sprocket
   Creating a Gear Belt Pulley
   Creating a Helical Gear
   Creating a Spur Gear
   Creating a Worm Gear
   Creating an Enlarged Pinion with a Standard Gear
   Creating an Excel Data Sheet
   Creating Involute Splines
   Creating Non-Standard Pitch Spur Gears
   Fix Involute Sketch
   Gear Belt Options
   GearTrax Options
   General Options
   Helical Gear Options
   Internal Gear Sets
   Measurements Options
   NetHASP Check
   Part Template File
   Reading an Excel Data Sheet
   Selecting a Manufacturing Method for Spur/Helical Gears
   Selecting an AGMA Backlash Range for Spur Gears
   SolidWorks Version
   Spline Options
   Sprocket Options
   Spur Gear Options
   To modify an existing part:
   Tooth Pattern
   Version Check
   Worm Gear Options
    Arcs option
       Bevel Gear Options
       Spur Gear Options
       Worm Gear Options
    Automatically
    backlash range
    Belt Pulleys tab
    Check
    class
    desired belt pitch
    desired Belt Type
    desired Chain Number
    desired Diametral Pitch
       Creating a Bevel Gear
       Creating a Worm Gear
    desired number
    desired pitch
       Creating a Helical Gear
       Creating a Spur Gear
    desired spline size
    desired Standard
    direction
    Draw Auxiliary Sketches check box
    Enlarged pinion-standard gear check box
    fine pitch standard
    Gear Belts tab
    General tab
       2d Spline Creation Over ride
       Auxiliary Sketches
       Fix Involute Sketch
       General Options
       NetHASP Check
       Part Template File
       SolidWorks Version
       Tooth Pattern
       Version Check
    Helical Gears tab
    Internal gear set check box
    Link
    Measurements tab
    Mounting style
    pressure
    root
    single tooth spline
    spline
    Spline option
       Bevel Gear Options
       Spur Gear Options
       Worm Gear Options
    Sprockets tab
    Spur Gears tab
    Spur/Helical tab
       Creating an Excel Data Sheet
       Reading an Excel Data Sheet
    Worm Gears tab
    “Non standard Pitches
Select Addendum Diameter
Select Base Diameter
Select Company Standards
    Addendum
Select Create Excel Data Sheet
Select Dedendum Diameter
Select Fix Involute Sketch check box
Select Hide sketch on creation
Select Hub 1st side
Select Internal/External button
Select manufacturing method
Select Never
Select options
   Calculating Addendum and Clearance Coefficients
   General Options
   Select Company Standards for Addendum, Clearance and Fillet Radius Coefficients
   Selecting a Manufacturing Method for Spur/Helical Gears
   Spline Options
Select Pitch Diameter
Select Read
    Data Sheet
Select Spur
Select Standard Series
Select Tooth Profile Cut
   Inserting a Spline Tooth Profile
   Updating a Spline
Select Units
Select Worm w/Gear
    model both parts
Selected
   Creating a Helical Gear
   Creating a Spur Gear
   Fillet Radius, Fillet Radius Coefficient
   Getting more information about the Spline
   Introduction: GearTrax/SolidWorks Model
   Spur Gear Options
   Transverse diametral pitch verses normal diametral pitch
    drop down box displays
Selected item
   Creating a Non-Standard Spline
   Getting more information about the Spline
Selecting
   Adding a mounting style to the Gear or Pulley
   Bevel Gear Options
   Helical Gear Options
   NetHASP Check
   Selecting a Gear Standard
   Selecting a Manufacturing Method for Spur/Helical Gears
   Selecting an AGMA Backlash Range for Spur Gears
   Spur Gear Options
   To modify an existing part:
   Tooth Pattern
   Tooth Thinning
   Worm Gear Options
    AGMA Backlash Range
    class
    Class option
       Bevel Gear Options
       Helical Gear Options
       Spur Gear Options
       Worm Gear Options
    Finish Button
    Gear Standard
    keyway style
    Manufacturing Method
    supported ANSI/AGMA standard
Selecting helix gear type enables
    Helix
    text boxes
Selecting no
Selecting Update Active Part
Selecting yes
Self-intersecting lines
Send
    Custom Information stored
Sending
    Custom Information
Series
   2d Spline Creation Over ride
   Bevel Gear Options
   Introduction: GearTrax/SolidWorks Model
   Spline Options
   Spur Gear Options
   Tooth Creation
   Worm Gear Options
    convert splines
    points
       Introduction: GearTrax/SolidWorks Model
       Tooth Creation
    small
Set
   Addendum Modification Coefficients
   Adding a mounting style to the Gear or Pulley
   Belt Pulley Options
   Bevel Gear Options
   Creating a Bevel Gear
   Creating a Spur Gear Rack
   Fillet Radius, Fillet Radius Coefficient
   Gear Belt Options
   Helical Gear Options
   Inserting a Drawing Annotation
   Inserting a Spline Tooth Profile
   Setting the helix angle by specifying the center distance
   Setting the Length Units
   Spline Options
   Sprocket Options
   Spur Gear Options
   Topping Adjustment
   Updating a Spline
   Worm Gear Options
    desired
    fillet radius
    helix
    length unit
    Length Units
    number
    per-string character
    Spiral direction
    topping
    “Manual only
Set Annotation options
Set options
   2d Spline Creation Over ride
   Auxiliary Sketches
   Belt Pulley Options
   Bevel Gear Options
   Fix Involute Sketch
   Gear Belt Options
   GearTrax Options
   General Options
   Helical Gear Options
   Measurements Options
   NetHASP Check
   Part Template File
   Selecting a Manufacturing Method for Spur/Helical Gears
   SolidWorks Version
   Spline Options
   Sprocket Options
   Spur Gear Options
   Tooth Pattern
   Version Check
   Worm Gear Options
Set properties
Set screws
Set standards
Setscrew hole
Setting
   Inserting a Drawing Annotation
   Setting the helix angle by specifying the center distance
   Setting the Length Units
    helix angle
    Length Units
    options
Setting GearTrax
    create
Settings
   Adding a mounting style to the Gear or Pulley
   GearTrax Options
    tab
    Use
Shafts
Shape
    revolving
Short cantilevered beam
Single part
    multiple teeth
Single tooth spline
    Select
Size
   Creating a Worm Gear
   Tooth Thinning
    Determine
Sketch
   Auxiliary Sketches
   Between Pins Example
   Fix Involute Sketch
   Inserting a Spline Tooth Profile
   Introduction: GearTrax/SolidWorks Model
   Updating a Spline
    Close
    create
    drawn
Sketch points
    prevent unintentional dragging
Sketch using SolidWorks
    manually extrude cut
Sketches
   General Options
   Introduction: GearTrax/SolidWorks Model
Small
    series
Small button
   Creating a Non-Standard Spline
   Getting more information about the Spline
Software
SolidWorks
   Creating a Worm Gear
   Fix Involute Sketch
   Getting more information about the Spline
   How does GearTrax store these values?
   Inserting a Drawing Annotation
   Sending the Custom Information to an Excel data sheet
   SolidWorks Version
   Starting GearTrax
   To modify an existing part:
   Tooth Creation
SolidWorks 2001 Plus GearTrax
SolidWorks API
    create solid models
SolidWorks menu tree
SolidWorks part file
    Excel spread sheet
SolidWorks part unit setting
    change
SolidWorks serial number
SolidWorks setting
    regard
SolidWorks Version
Space width
    change
Specified
   Creating a Helical Gear
   Inserting a Drawing Annotation
Specify
   2d Spline Creation Over ride
   Addendum Modification Coefficients
   Auxiliary Sketches
   Bevel Gear Options
   Calculating a Tooth Thickness
   Creating Non-Standard Pitch Spur Gears
   Fix Involute Sketch
   NetHASP Check
   Part Template File
   Select Company Standards for Addendum, Clearance and Fillet Radius Coefficients
   Selecting a Manufacturing Method for Spur/Helical Gears
   Tooth Pattern
   Version Check
    Addendum modification coefficient
    creation
    Manufacturing method
    number
    pin diameter
    template
Specifying
    center distance
Spin box
   Creating a Bevel Gear
   Creating a Chain Sprocket
   Creating a Gear Belt Pulley
   Creating a Helical Gear
   Creating a Spur Gear
   Creating Involute Splines
    use
       Creating a Bevel Gear
       Creating a Chain Sprocket
       Creating a Gear Belt Pulley
       Creating a Helical Gear
       Creating a Spur Gear
       Creating Involute Splines
Spin buttons
   Creating a Worm Gear
   Creating Involute Splines
   Selecting an AGMA Backlash Range for Spur Gears
    use
       Creating a Worm Gear
       Creating Involute Splines
       Selecting an AGMA Backlash Range for Spur Gears
Spin control
    use
Spiral
    hand
Spiral bevel gear place
    create
Spiral bevel gear set box
Spiral direction
    Set
Spline
   Between Pins Example
   Bevel Gear Options
   Creating an Excel Data Sheet
   Creating Involute Splines
   Getting more information about the Spline
   How does GearTrax store these values?
   Inserting a Spline Tooth Profile
   Inserting a Tooth Profile Sketch
   Introduction: GearTrax/SolidWorks Model
   Measurements Options
   Spur Gear Options
   Tooth Creation
   Updating a Spline
   Worm Gear Options
    center
    define
    Select
    Updating
Spline option
   Bevel Gear Options
   Spur Gear Options
   Worm Gear Options
    select
       Bevel Gear Options
       Spur Gear Options
       Worm Gear Options
Spline Options
Spline select
    Internal Only button
Spline tab
   Calculating a Tooth Thickness
   Creating an Excel Data Sheet
   Inserting a Spline Tooth Profile
   Reading an Excel Data Sheet
    GearTrax select
Spline tooth cut
Spline tooth profile
   Inserting a Spline Tooth Profile
   Inserting a Tooth Profile Sketch
    Inserting
Splines
   Creating an Excel Data Sheet
   Introduction: GearTrax/SolidWorks Model
   Spline Options
   Tooth Creation
   Updating a Spline
    pair
Splines tab
Split Tapered Bushing
Split-tapered bushing
    bore
Sprocket
   Creating a Chain Sprocket
   Introduction: GearTrax/SolidWorks Model
   To modify an existing part:
    Heavy Series
Sprocket Options
Sprockets tab
    Select
Spur
   Measurements Options
   Select Company Standards for Addendum, Clearance and Fillet Radius Coefficients
Spur Gear
   Creating a Spur Gear
   Modification of Parts
    create
    Creating
Spur Gear Options
Spur Gear Rack
    create
    Creating
Spur gear set
   Approach Length
   Contact Ratio
   Recess Length
    length
Spur gear tooth
    length
Spur gears
   Introduction: GearTrax/SolidWorks Model
   Selecting an AGMA Backlash Range for Spur Gears
    Similar
Spur gears option dialog box
Spur Gears tab
    Select
Spur option button
    Gear Type box select
Spur/helical
   Creating an Excel Data Sheet
   Modification of Parts
Spur/Helical Gears
   Selecting a Manufacturing Method for Spur/Helical Gears
   Tooth Creation
    see Manufacturing Methods
Spur/Helical tab
   Calculating a Tooth Thickness
   Creating an Excel Data Sheet
   Reading an Excel Data Sheet
    Select
       Creating an Excel Data Sheet
       Reading an Excel Data Sheet
Standard
   Bevel Gear Options
   Creating a Bevel Gear
   Creating a Helical Gear
   Creating a Spur Gear
   Helical Gear Options
   Internal Gear Sets
   Measurements Options
   Select Company Standards for Addendum, Clearance and Fillet Radius Coefficients
   Spur Gear Options
   Worm Gear Options
    default
    pin sizes
    See help
Standard Chordal measurements
Standard fillet radius
Standard Gear
Standard pressure
   DIN-867 Standard
   JIS B 1701-1973 Standard
Standard setscrew hole
    GearTrax model
Standard split tapered bushings
Standards
   Creating Non-Standard Pitch Spur Gears
   Selecting a Gear Standard
   Selecting a Manufacturing Method for Spur/Helical Gears
Standards drop down box
   Creating a Helical Gear
   Creating a Spur Gear
    box below
Start
   Inserting a Spline Tooth Profile
   Inserting a Tooth Profile Sketch
    new sketch
    new sketch In SolidWorks
Start GearTrax
Start SolidWorks
Start-up
Started
Starting
   Part Template File
   Starting GearTrax
    new GearTrax part
Starting GearTrax
Startup
   NetHASP Check
   Version Check
    delay
Straight bevel gears created
Straight lines
Strands
Stronger
Stub
    20-diametral pitch
Subtract
   Belt Pulley Options
   Bevel Gear Options
   Gear Belt Options
   Helical Gear Options
   Spline Options
   Sprocket Options
   Spur Gear Options
   Worm Gear Options
Sum
Summary Information window
    Sample
Support
Supported ANSI/AGMA standard
    selecting
Surface
Swept
Switch
    need
Switching
    non-standard pitches GearTrax