To add a mounting style:
· Select a Mounting style from the Mounting tab.
· Selecting a keyway style will allow you to have GearTrax model a standard setscrew hole. The setscrew hole will be drawn only if a hub is being drawn. The setscrew hole will be centered on each of the hub(s).
· If a bore for a split-tapered bushing is called for, check the Split Tapered Bushing button. Select the appropriate Split Tapered Bushing from the drop down box.
· Note: The split-tapered bushing is not drawn only the bore and mounting holes. See the Camnetics web site www.camnetics.com or the CD for libraries of standard split tapered bushings.
· Select Hub 1st side and/or Hub/c’bore 2nd side.
· Set the values for the appropriate hub. Use the Settings for: drop down box to enter values for each of the hubs to be drawn.
· Click on the Finish button to complete the drive component.
· A counter bore may be drawn on the second side by entering a negative number in the Hub projection / c’bore input box.