GearTeqHelp-2012index
    Copyright Notice
    Introduction
    Definitions
    Starting GearTeq
    GearTeq Menus
    Options
    Assemblies
    Assembly Positions (AP)
       a_General_Assembly
       b_Mating_Component
       Belt_Pulley
       Bevel_Gears
       Chain_Sprocket
       Gear_Belt
       Spline_Tolerance_ANSI
       Spur
          Spur
          Center_Distance_Actual
          Center_Distance_Extension
          Center_Distance
          Center_Distance_Locked
          Center_Distance_Standard
          Contact_Length_Approach
          Contact_Length_Recess
          Contact_Ratio
          Contact_Ratio_Face
          Contact_Ratio_Total
          Diameter_Start_of_Active
          Efficiency
          Flip_Backlash
          Flip_Line_of_Action
          Friction_Coefficient
          Gear_Type
          HPSTC_Highest_Point_of
          LPSTC_Lowest_Point_of
          Pressure_Angle_Working
          Working_Depth
    Spur Gears
    Bevel Gears
    Chain Sprockets
    Gear Belt Pulleys
    Belt Pulleys
    Worm Gears
    Involute Splines
    Material Property
    Hub Data
    Tool Bars
    Active Feature Selector
    Assembly Tree
    Alerts
    Mouse controls
    Creating a Rack
    Creating an Internal Gear
    Joined parts, side one or two
    Adding an internal spline as a bore to another component
    Addendum Modification and Addendum Modification Coefficient.
    Creating a Non-Standard Spur Gear
    Modifying the Involute Profile on a Spur Gear
    Tutorial – Creating a Spur Gear with an Internal Spline as a Bore
    Tutorial – Spur Gear Assembly
    Tutorial – Creating a Spur Gear with two Racks