GearTeqHelp-2012index
    Copyright Notice
    Introduction
    Definitions
    Starting GearTeq
    GearTeq Menus
    Options
    Assemblies
    Assembly Positions (AP)
    Spur Gears
       Addendum
       Addendum_Modification
       Addendum_Modification1
       AGMA_Class
       Backlash
       Backlash_Arc_Minute
       Blank_OD_of_Internal_Gear
       Chordal_Tooth_Height
       Chordal_Tooth_Reference
       Chordal_Tooth_Thickness
       Chordal_Tooth_Thickness2
       Circular_Pitch
       Code_Tooth_Thickness
       Coefficient_Addendum
       Coefficient_Clearance
       Coefficient_Clearance1
       Coefficient_Fillet
       Contact_Diameter
       Contact_Length_Approach1
       Contact_Length_Recess1
       Contact_Ratio1
       Dedendum
       Diameter_Base
       Diameter_Base_Normal
       Diameter_Major
       Diameter_Minor
       Diameter_Pitch
       Diameter_Pitch_Normal
       Diameter_Pitch_Operating
       Diameter_True_Involute
       External_Internal_Rack
       Face_Width
       Fellows_Stub_Denominator
       Fillet_Radius
       Gear_Standard
       Helix_Angle
       Helix_Direction
       Hob_Protuberance
       Keyway
       Keyway_Position
       Lead
       Manufacturing_Method
       Mate_Angle1
       Max_Runout
       Measurement_Over_Under
       Measurement_Over_Under1
       Modification_Profile_APL
       Modification_Profile_APL1
       Modification_Profile_APL2
       Modification_Profile_APL3
       Modification_Profile_BPL
       Modification_Profile_BPL1
       Modification_Profile_BPL2
       Modification_Profile_BPL3
       Module_displayed_as
       Module_Normal
       Mounting_Bushing_Modeling
       Mounting_Bushing_Side
       Name
       Number_of_Teeth
       Path
       Part_Color
       Pin_Diameter
       Pitch_Depth_of_Rack
       Pitch_Diametral
       Pitch_Diametral_Normal
       Pressure_Angle
       Pressure_Angle_Normal
       Pressure_Angle_Working1
       Roll_Angle_at_Custom
       Roll_Angle_at_Major
       Roll_Angle_at_Profile
       Roll_Angle_at_Profile1
       Roll_Angle_at_TIF
       Shrinkage_Rate
       Span_Measurement
       Span_Measurement_Minimum
       Span_Measurement_Teeth
       Teeth_to_Pattern
       Tolerance_Profile
       Tolerance_Tooth_Alignment
       Tolerance_Tooth_Thickness
       Tolerance_Total_Composite
       Tolerance_Total_Index
       Tooth_Thickness
       Tooth_Thickness_at_Major
       Tooth_Thickness_Normal
       Tooth_Thickness_Tolerance
       Topping_Adjustment
       Units
       Upper_Tooth_Thickness
       Variation_Pitch
       Whole_Depth
    Bevel Gears
    Chain Sprockets
    Gear Belt Pulleys
    Belt Pulleys
    Worm Gears
    Involute Splines
    Material Property
    Hub Data
    Tool Bars
    Active Feature Selector
    Assembly Tree
    Alerts
    Mouse controls
    Creating a Rack
    Creating an Internal Gear
    Joined parts, side one or two
    Adding an internal spline as a bore to another component
    Addendum Modification and Addendum Modification Coefficient.
    Creating a Non-Standard Spur Gear
    Modifying the Involute Profile on a Spur Gear
    Tutorial – Creating a Spur Gear with an Internal Spline as a Bore
    Tutorial – Spur Gear Assembly
    Tutorial – Creating a Spur Gear with two Racks