Hub Data
Each Component has a Hub Data category
Bore defines the diameter of the bore.
Bore Chamfer defines the size of the chamfer at the ends of the bore.
Hub 1st Side Chamfer defines the size of the chamfer and fillet for the hub revolve on side one of the component.
Hub 1st Side Diameter defines the size of the diameter of the hub revolve on side one of the component.
Hub 1st Side Projection defines the size of the projection of the hub revolve on side one of the component.
Hub 2nd Side Chamfer defines the size of the chamfer and fillet for the hub revolve on side two of the component.
Hub 2nd Side Diameter defines the size of the diameter of the hub revolve on side two of the component.
Hub 2nd Side Projections defines the size of the projection of the hub revolve on side two of the component.
Keyway defines the type of keyway, if any, to be created with the component. A valid bore diameter must be specified.
Keyway Position defines the keyway relative to the tooth; select On Tooth Center or On Space Center. If the component is part of a planetary set it should be left at the On Space Center option.
Mounting Bushing Modeling determines if the bushing should be created as part of the component or as a new part. Select ‘Create as component feature’ to have the bushing created as a feature in the CAD model. Select ‘Create as new part’ to have the bushing created as a new CAD model.
Mounting Bushing Side defines on which side of the component the bushing will be mounted.
Mounting Split Taper Bushing defines, if any, the bushing to be used with the component.
Standard Set Screw defines if a standard set screw should be used with a keyway. The setscrew hole will only be created if a hub and keyway are also created.