Gear Belt Pulleys
Belt Pitch defines the belt series and pitch.
Belt Width defines the width of belt to be used with this component.
Pitch Diameter is a read only value that defines the value of the pitch diameter. The pitch diameter of gear belt pulleys equals the belt pitch multiplied by the number of teeth divided by PI.
Flange Creation defines the type of flange to be created, if any.
Flange ID defines the inside diameter of the flange. This is a read only value and cannot be changed. This is a reference dimension; different manufacturers may use other values.
Flange OD defines the outside diameter of the flange. This is a read only value and cannot be changed. This is a reference dimension; different manufacturers may use other values.
Flange Thickness defines the thickness of the flange. This is a read only value and cannot be changed. This is a reference dimension; different manufacturers may use other values.
Name defines the name of the part.
Number of Teeth defines the number of teeth for the component.
Outside Diameter defines the diameter of the pulley body, not the flange diameter. This is a read only value and cannot be changed.
Part Color sets the color of the component. If the component is the active component then the color used for display is determined by the Color_Active_Component option in the Options menu. To get an active component to be displayed in its specified color, set the Color_Active_Component option to Transparent.
Path defines the name of the folder where the component files are stored.
Pulley Width defines the width of the pulley at the bore not including any hub projections.
Teeth to Pattern defines the number of teeth to pattern when creating the model in CAD. The options are All, None, or First 10. If this is set to All, GearTeq will create a pattern that contains all the teeth. This might be very time consuming if there are a large number of teeth and/or the component is a helical gear. If this is set to none, then a pattern will not be created. Set this to ‘First 10’ to create a pattern with 10 teeth that can easily be expanded in the CAD system.
Tooth Width is the width of the pulley between the flanges. This is a read only value and cannot be changed.
Units sets the measurement units for the component; select Inches or Metric.